02.10.2018 – Taipei, Taiwan. Coinciding with the release of 2nd Gen AMD™ Ryzen™ Threadripper™ CPUs, CRYORIG is releasing its sTR4 Upgrade Kit for its high-end air coolers. The sTR4 Upgrade Kit is compatible with the CRYORIG R1 series, C1 series, H5 series and H7 Quad Lumi. With the new sTR4 Upgrade Kit users are able to use their favorite CRYORIG air cooling solutions with both 1st Gen and 2nd Gen AMD™ Ryzen™ Threadripper™ CPUs. *Coolers with less than 4 heatpipes are not suggested, as well as the ultra-compact C7 series coolers.
Continue reading →

08.08.2018 Taipei, Taiwan. Enthusiast thermal solutions brand CRYORIG releases the new H7 Plus and M9 Plus dual fan heatsinks. Based on the best-selling H7 and M9i/a, CRYORIG is now offering these two models with a direct dual fan upgrade for best in class performance. Adding an additional fan makes the overall heatsink airflow even better optimized to expel heat directly into the rear system fan and out of the PC case. With an included PWM Y-Cable, users can have both front and back fan speed synced together for optima efficiency.
Continue reading →

22.05.2018 Taipei, Taiwan – Ahead of Computex 2018 CRYORIG announces new M.2 cooler Frostbit and RGB enhanced C7 RGB CPU Cooler. CRYORIG’s Frostbit is not only the industry first aftermarket M.2 NVMe SSD cooler with dual heatpipes, it allows full adjustment of the Secondary Heatpipe and large volume Heatsink. The C7 RGB is based on CRYORIG’s award winning ITX cooler C7, with a 12v RGB lighting enhanced 92 mm fan. Both products will be shown at CRYORIG’s Computex booth at Nangang Exhibition Hall I0527.
Continue reading →

18.04.2018, Taipei. After nearly a year from first announcing the Cu line of full copper coolers PC cooling innovator CRYORIG is now releasing the C7 Cu copper enhanced SFF ITX cooler. The C7 Cu is built from the award winning C7 architecture with one obvious upgrade, the extravagant use of copper for the whole heatsink body. By exchanging for a full copper build from aluminum has allowed the C7 Cu see improvements of up to 15% in thermal performance. The increased thermal performance without increased size is a key advantage of the C7 Cu especially in ultra-compact SFF/ITX builds where space is limited.

Continue reading →

28.11.2017 Taipei, Taiwan – First released together with the acclaimed H7 heatsink, the QF120 system fans series is now getting a LED upgrade. This new line of white LED based system fans is based on CRYORIG’s innovative QF120 Series. Like the original QF120 it comes in three different models each with different RPM ranges, ranging from 200-1.000 RPM in the QF120 LED Silent, 330-1.600 RPM with the QF120 LED Balance, and 600-2.200 RPM on the QF120 LED Performance.
Continue reading →

22.06.17 Taipei, Taiwan – In response to the soon to be launched new Intel™ LGA 2066 socket, PC thermal solution brand CRYORIG announces that all existing LGA2011v3 supported models will support the new LGA 2066 socket. The supported models include: all A series liquid coolers, the R1 Ultimate/Universal, R5, C1, H5 Ultimate/Universal and the H7 Quad Lumi.
Continue reading →

29.05.17 Taipei, Taiwan – CRYORIG, the PC Cooling and peripherals innovator is releasing their first PC case project the Taku on crowdfunding website Kickstarter. The Taku, first announced and exhibited last summer, will also be shown during Computex 2017. The TAKU has been in development for over 2 Years in house, with over 6 months of co-development with manufacturing partner Lian Li. The Taku Kickstarter campaign begins on May 29th and ends on July 28th. Besides offering backers the chance to be the first people to receive the Taku, backers are also offered multiple customization options only available on Kickstarter.

The TAKU is a hybrid between a PC Monitor Stand and a high-end ITX form factor PC case. With the TAKU, the PC footprint is minimized to free up desk space while at the same time fitting a high-performance PC system. The benefit of this state of the art design is that the monitor, keyboard and the full PC system is arranged vertically on top of each other. Meaning the total footprint is lowered, and valuable deskspace is freed. The Taku is compatible with GPU’s up to 280 mm, ITX form factor mainboards, SFX or SFX-L power supplies, fully capable of housing a high-end Gaming PC. Taku’s storage space is also well taken care of. The Taku can also fit 1x 3.5” HDD and two 2.5” SSD/HDD.

As a PC Monitor Stand the Taku can support monitors up to 15 kg and fit a full 104 key mechanical keyboard underneath the stand. The system tray can be fully slid out of the chassis for easy installation of PC components or upgrades. On the right side of the Taku you’ll find dual USB 3.0 ports and audio in/out ports. An USB-Type C port will be made available in later revisions. The Taku will also include two cable management holes at the front. This allows for cables to be run through the system tray and connected to the back ports of the Taku. Providing easy and clean cable management of USB charging lines for your phone or peripheral.

With the Taku, CRYORIG combines wood and aluminum to create an organic feeling piece of Technology that would fit perfectly into any home, or work environment. CRYORIG is going to add one C7 ITX Cooler free of charge, if the Taku project exceeds 1.000 units. The Taku campaign will begin on May 29th and offer multiple colors and material options for users to mix and match. Early bird backers will be able to get the Taku at USD$ 250 (-VAT,-shipping) with standard Taku Classics going up to USD$ 299(-VAT,-shipping), the custom TAKU PE’s cost will depend on customization options. First shipments of the Taku will go out to backers beginning September 2017.

<p>24.05.17 Taipei, Taiwan – PC Cooling innovator CRYORIG, is announcing two new CPU cooling projects ahead of Computex 2017. The CRYORIG R5 high-end single tower and the Cu Series of Copper Fin enhanced coolers. The R5 and Cu Series will both make their debut in the coming Computex 2017 from May 30^th to June 3^rd at Nangang Exhibition Hall 1 booth i1105.</p>

<p>The R5 is the second cooler in CRYORIG’s R series of flagship coolers. The R5 is the missing piece to CRYORIG’s PC cooling lineup. It is a high-end dual-fan single tower that is designed to stay within the mainboard’s CPU Keep-Out-Zone. This means that the CRYORIG R5 has Zero RAM Interference, even on Intel’s X99/X299 based platforms. Made with performance in-mind the R5 contains multiple CRYORIG cooling innovations including: Convex-Align cooler base optimization, Multi-Seg™ Quick Mount System, 6 CRYORIG High-end Copper Heatpipes, CRYORIG Dual Fan Fin Optimizations and more. Dual XF140 800 – 1.400 rpm PWM fans will be attached front and back for enhanced performance. The R5 will also see the debut of CRYORIG’s brand new Quick Lock Mounting, that promises to simplify the way coolers are mounted.

<p>CRYORIG’s Cu (Copper) enhanced Performance Edition coolers is a new twist to CRYORIG’s award winning CPU coolers. In traditional heatsink fin designs Aluminum provides a good combination of performance, weight and cost. But Copper provides roughly twice the heat conductivity compared to Aluminum. This is why CRYORIG is hand picking some of their most acclaimed coolers and fitting them with brand new pure copper fins. The Cu Series will first make it’s debut at Computex 2017. The CRYORIG C7 will be the first cooler to receive the Cu enhanced treatment, with further products to be announced later.

<p>Besides of the R5 and Cu Series, the CRYORIG Taku will also be in exhibition during Computex 2017. CRYORIG’s booth is at Nangan Exhibition Hall 1, 1^st Floor booth i1105 from May 30^th to June 3^rd.</p>

17.05.17 Taipei, Taiwan – PC cooling and peripherals innovator CRYORIG announces their collaboration project with NZXT, the software controlled RGB LED H7 Quad Lumi will be releasing this June. The H7 Quad Lumi is based on CRYORIG’s award winning H7, the H7 Quad Lumi features a total of four 6 mm high-end copper heatpipes, NZXT CAM Powered Lumi Lighting System as well as a new QF120 1.600 RPM LED fan. Co-developed with NZXT, CRYORIG has managed to add a built-in RGB LED controller directly into the H7 Quad Lumi. Running on NZXT’s CAM, the H7 Quad Lumi can independently control the logo and base lighting of the heatsink through CAM software and smartphone app.

With close collaboration with NZXT for over a year, CRYORIG has managed to develop something truly unique with the H7 Quad Lumi and Lumi Lighting System. The Lumi Lighting System is built on NZXT’s Hue+ controller board and CAM software system, with nine different special lighting effects available at launch and more to come with future firmware updates. The Lumi system is capable of dual channel LED configurations, meaning the top and base LED’s can be set to different colors and even separate special effects. Powered and controlled through NZXT CAM software, LED control, CPU temp monitoring, fan RPM control and profile settings are all available. This makes the H7 Quad Lumi the first CAM Powered peripheral and a true innovated approach for PC cooling solutions.

At the core the H7 Quad Lumi is based on the successful CRYORIG H7. The difference besides the addition of the Lumi Lighting System is an upgrade to four high performance heatpipes for added TDP capacity, a new QF120 LED 1.600 RPM fan and also a reworked mounting system. With the upgraded heatpipe setup, the H7 Quad Lumi has increased heat dissipation performance by at least 15% over the H7 and now supports 160+ watt CPUs. The new Quick Mount system will also provide support for LGA2011 v3 as well as continue support for LGA115x and AMD’s AM4 sockets. Supporting all latest offerings from Intel and AMD. The QF120 LED version is a PWM controlled 300 to 1.600 RPM white LED fan. Features of the QF120 LED include built in Acoustic Absorbers, Quad Air Inlet™ system for added air intake and white LED lighting. CRYORIG’s QF120 line of fans will soon all feature LED variants.

The H7 Quad Lumi will be released in June worldwide with a MSRP of USD $59,99 (-VAT) worldwide and €59,99 (incl. VAT) in Europe.

Added Software Download is required for LED lighting control.

07.03.17 Taipei, Taiwan – With the much-anticipated release of the AMD Ryzen, CRYORIG prepares to launch a full line of AMD Ryzen dedicated coolers as well as simple upgrade kits for existing AMD compatible CRYORIG cooling products. Beginning from Type A to Type D, there will be a total of 4 different AM4 upgrade kits depending on the corresponding CRYORIG product. Natively supporting Ryzen dedicated version models will begin to release later in Q2 2017 and will consist of the full CRYORIG cooling portfolio.

Continue reading →

25.01.17 Taipei, Taiwan – In response to AMD’s soon to be released Ryzen CPU and AM4 platform, PC thermal solution brand CRYORIG will be providing free AM4 upgrade kits soon after the official release of the AMD Ryzen CPU release. All users of existing AMD supported products will be able to apply for the free upgrade kits. Native AM4 mounting kits will also start to hit the markets after the official release of the CPU.

Continue reading →

18.01.17 Taipei, Taiwan – CRYORIG, PC thermal solutions expert has built upon the successful QF120 line of system fans to release the new QF140 Performance and QF140 Silent 140 mm fans. The QF140 like the original QF120 line features CRYORIG proprietary Quad Air Intake™ system. Four strategically placed air intakes are located on the corners of the QF140 fan frame, allowing the static pressure optimized fan blades take in extra air from the sides of the fan frame increasing overall air output. CRYORIG HPLN™ High Precision Low Noise fluid bearing is used again for low noise performance. Integrated rubber Vibration Absorbers also come preinstalled to absorb excess vibration. Both QF140 models are fully PWM capable for advanced user RPM control.

Continue reading →

24.05.16 Taipei, Taiwan – For Computex 2016, CRYORIG is revealing their first foray into PC cases with two innovated and uncommon projects. The CYORIG OLA is a Mac Pro inspired cylindrical home theater lifestyle ITX PC case with focus on performance and cooling. The CRYORIG TAKU is a monitor stand PC case that focuses on maximizing desk space while slides open for easy access to hardware. Both the OLA and TAKU projects are still in early development. CRYORIG is planning on a “Ask Anything” live stream event on June 1st during Computex for user feedback on both projects.

Continue reading →

11.05.2016 Taipei, Taiwan – PC Thermal solutions expert CRYORIG is releasing the second Origami based compatibility checker. Following the industry acclaimed CRYORIG Origami Tester that was initially released in 2014 for testing mainboard and component compatibility with CRYORIG products, CRYORIG has pushed the limits of paper folding innovation again with the CRYORIG Origami Case Depth Checker! The CRYORIG Origami Case Depth Checker is a simple to build tool to help PC builders measure their case’s CPU Cooler Tolerance Height, as there are still many case manufacturers who for some reason choose to omit this in their product page. Without this critical information, PC builders are left in the dark regarding wither or not a certain cooler will fit their case or not.

Continue reading →

16.03.2016 Taipei, Taiwan – PC thermal solution innovator CRYORIG offers free parts for alternative mounting of the C7 and the M9i/a CPU Coolers. The CRYORIG C7 and M9 line of products have been gaining a lot of support by ITX system builders due to their miniature foot print and high quality performance. Recently CRYORIG has received much feedback regarding backplate interference with certain components on the back of ITX and MicroATX form factored mainboard. Although the backplate for the C7 and M9 is non-conductive and safe to install even if components like backside IC’s or extra-long soldering pins come into contact.
Continue reading →

18.12.15 Taipei, Taiwan – 2015 has been another big and successful year for CRYORIG. With the launch of the acclaimed H7 and H5 Ultimate entry and mid-range coolers, robust line of CRYO-Pastes, the industry’s first color customizable heatsink accessory CUSTOMOD for R1, tiny but heavy weight performers C7 and M9i/a and finally CRYORIG’s first liquid cooling based A-Series of Hybrid Liquid Coolers. In a gesture of gratitude cooling solution innovator CRYORIG is holding two special giveaway events, one for VIP members one opened to all. CRYORIG is giving away a total of 5 LUMI Edition H7’s and 2 LUMI RGB+ Edition H7’s.
Continue reading →

08.12.15 Taipei, Taiwan – We at CRYORIG have the following information and statement to make, regarding the recent news and discussion regarding damaged PCB’s on Skylake CPU’s, which many in the industry believe is caused by abnormal heatsink mounting pressure during transportation of the PC system. First of all we want to assure users of CRYORIG products that currently no CRYORIG heatsinks have displayed this problem, either through media reports, third party sales channels or internal testing. CRYORIG heatsinks are fully compatible with socket 1151 processors, and follow specifications set forth by CPU manufacturers. But as a note of precaution we suggest users to lay their PC system flat (with the heatsink in a vertical position) whenever they are transporting their PC system.
Continue reading →

03.11.2015 Taipei, Taiwan – CRYORIG, PC cooling solution innovator releases the much speculated and also anticipated A Series of Hybrid Liquid Coolers. First unveiled in June at Computex 2015, the CRYORIG A Series Hybrid Liquid Cooler or HLC has been under much speculation from the PC cooling market. The CRYORIG’s A40/A40 Ultimate and A80 HLC units are built on the base of Asetek’s 5th Generation Pump and CPU Cold Block technology with a small but obvious twist. With an additional adjustable and detachable Airflow fan, the CRYORIG A Series HLC is capable of lowering the temperatures of the components surrounding the CPU by up to 20%. This major drop in heat buildup effectively improves system stability, component lifespan and overall system temperatures. The CRYORIG A Series will come in three models based on radiator size, beginning with the A40’s 240 mm radiator, the A40 Ultimate with a 240 mm by 1.5” thick radiator and the A80 with a 280 mm radiator.
Continue reading →

16.09.2015, Taipei, Taiwan – PC thermal solution innovator CRYORIG releases the M9i and M9a, a compact tower cooling solution with three 6-mm heatpipes, True Copper Base and 92 mm 2,200 rpm PWM fan. The CRYORIG M9i/M9a is an entry-level tower heatsink that is both compact and affordable, but comes packing with material and tech comparable to CRYORIG’s other ultra high end products. Three 6-millimeter high performance copper heatpipes and a True Copper Base makes up the core of the M9i/M9a. Bucking the trend of removing the costly copper base in entry-level products, the M9i/M9a has all the same makings of CRYORIG’s other more expensive products like the H5 Ultimate. The True Copper Base improves heat conduction and contact area for all the heatpipes. Together with CRYORIG’s proprietary Jet Fin Acceleration System enabled aluminum fins, makes up for the high performance seen on such a small product. The M9 also safely avoids the RAM and PCI-E slots, completely avoids any RAM and PCI-E compatibility issues. With a total height of only 124,6 mm, it is also highly compatible with nearly all mid-tower ATX or Micro ATX systems.
Continue reading →

09.09.2015, Taipei, Taiwan – PC thermal solution innovation brand CRYORIG is releasing a new addition to it’s C Series line up and also it’s smallest cooler to date, the C7 compact cooler. First revealed in Computex 2015, the C7 is a low profile cooler with a max height of 47 mm. The C7’s 47 mm height also makes it only 2 mm taller than the Intel Stock Heatsink, meaning it will fit in almost all case designs. Despite it’s size, the C7 also packs a heavy dose of cooling with a total of 4 high performance heatpipes, phenomenal for it’s size. Fitted with a dedicated 92 mm 2.500 rpm PWM fan with CRYORIG’s proprietary Quad Air Inlet™ System for maximum airflow. The C7 effectively provides 25% more cooling capacity than stock heatsinks from Intel/AMD, while being up to 20% lower in noise. It’s 97 x 97 x 47 mm (WxLxH) dimensions also makes it compatible with the latest 1151/115x Intel boards and AMD offerings, with no interference with PCI-E GPU cards or RAM slots.
Continue reading →

19.05.2015, Taipei, Taiwan – Ahead of Taipei Computex in June, computer cooling innovator CRYORIG is releasing information of two new product lines, the CUSTOMOD line of customization accessories and a new line of CRYO-Paste thermal interfaces. These two new lines are one of the many new items that will be shown at CRYORIG’s booth during the coming Computex beginning June 2nd, 2015.

Continue reading →

21.04.2015 Taipei, Taiwan – Based on the acclaimed H5 Universal, CRYORIG has extended the successful Hive Fin™ based H series line with the CRYORIG H5 Ultimate. The H5 Ultimate features the same award winning features as the original H5 Universal, but with a larger XF140 140 mm fan and new jet-black heatsink covers. The larger XF140 increases the H5 Ultimate’s TDP from 160 to 180 Watt, putting the proprietary Hive Fin™ system to work. Together with the acclaimed MultiSeg™ mounting system, the H5 Ultimate will be the strongest single tower solution CRYORIG has up to date.

Continue reading →

21.01.2015, Taipei, Taiwan – CRYORIG, innovator of PC thermal products is always looking for new ways to innovate and improve the user experience. Beginning with the recently announced CRYORIG H7, checking step-by-step installation videos will be as easy as holding your phone up. Most users cannot access the web through their PC when they’re installing a new heatsink. So once you’re stuck on a step while installing, there’s no way to ask for help or check out the manufacturer’s site for tips and tutorials.
Continue reading →

12.01.2015, Taipei, Taiwan – CRYORIG, innovator of PC thermal solutions is releasing it’s new QF120 line of 120 mm PWM system fans. The new QF120 line features CRYORIG’s proprietary Quad Air Inlet™ system. Four strategically placed air intakes line up the corners of the QF120 fan frame, allowing the static pressure optimized fan blades take in extra air from the sides of the fan frame increasing overall air output. HPLN™ High Precision Low Noise bearing from the XF140 line makes a return in the QF120 Series for low noise performance. The fans will cover a wide RPM spectrum with PWM control, allowing users to fine tune it to their liking individually. Integrated rubber Vibration Absorbers also come preinstalled to absorb excess vibration.
Continue reading →

12.01.2015, Taipei, Taiwan – CRYORIG, innovator of PC thermal peripherals has released the H7. The next step in CRYORIG’s H series heatsink, the H7 holds an even smaller footprint while keeping an extremely high performance efficiency. Keeping almost all award winning features from the larger H5 Universal, the H7 packs great value in it’s small size. Featuring series moniker HiveFin™ technology for better air management and also CRYORIG’s much renowned Zero RAM Interference design among many others, the H7 will also feature CRYORIG’s brand new QF120 Balanced 120 mm 330~1.600 RPM PWM fan with Quad Air Inlet™ technology.
Continue reading →

16.12.2014, Taipei, Taiwan – CRYORIG, innovator of PC thermal peripherals, is preparing the second model in the H Series lineup, featuring H series standard HiveFin™ technology. Besides moniker HiveFin™ technology, the CRYORIG H7 will also incorporate Zero RAM Interference and many other great features found in previously announced CRYORIG cooling solutions. The CRYORIG H7 will be targeted at mainstream PC systems with limited CPU cooler height. Thanks to the total height of 145 mm, H7 will be able to fit almost all mid-tower cases.
Continue reading →

08.12.2014, Taipei, Taiwan – In a gesture to thank the world wide PC community for the great support, CRYORIG is holding a total of two year-end giveaway events, with the grand prize being one 24 Karat Gold Plated R1 Ultimate CPU Cooler. At the end of the two separate events, CRYORIG will be handing out a total of 4 Special Edition heatsinks. The first event is opened only to CRYORIG VIP members, meaning members who have purchased and registered at least one CRYORIG product. One winner will be chosen after all entries end on December 31st, for a 24 Karat Gold Edition Gold Plated CRYORIG R1 Ultimate.
Continue reading →

27.11.2014, Taipei, Taiwan – CRYORIG, PC thermal solutions innovator is releasing a new Compatibility Tester. The CR Origami testing system allows users to print out and put together a origami structure that will reflects the fin size footprint, heatpipe height limitations for a CRYORIG product and platform of choice. This allows users to pre-test their system and see for themselves if CRYORIG fit’s or not. Taking only a four steps to make your very own CR Origami Tester, the Tester is the fastest and easiest way to answer questions like wither the R1 Universal will interfere with your RAM/PCI-E and many more compatibility related questions.
Continue reading →

30.07.2014, Taipei, Taiwan – First introduced during the 2014 Taipei Computex, the innovator of PC thermal peripherals CRYORIG is now releasing the H5 Universal as part of a new line of single tower coolers. CRYORIG H Series will for the first time feature CRYORIG’s proprietary Hive Fin™ technology. The Hive Fin™ design allows for turbulence reduction of the airflow as well as Jet Fin Acceleration™ for faster hot air exhaust. CRYORIG’s H series will fit into the mainstream range within CRYORIG’s lineup. Similar to the high-class R1 Universal, H5 Universal will be equipped with CRYORIG’s XT140 slim profile fan for zero ram interference on Intel/AMD platforms. With a total height of 160 mm, the H5 Universal will be able to fit into almost all mainstream PC chassis setups.

Continue reading →

22.04.2014, Taipei, Taiwan – CRYORIG, newcomer in the professional PC cooling solutions market, announces hereby, that the C1 CPU cooler for ITX systems has completed rigorous testing and is now in production. The C1 is CRYORIG’s first product for the growing ITX PC ecosystem with a total height of only 7,4 centimeters. “With the increase of APU’s and enthusiasts level ITX mainboards and components, ITX systems are no longer limited to under powered components like they used to be.”, mentions CRYORIG Co-Founder and Chief Manufacturing Engineer Alex Wang. “ITX systems now are housing high performance, high TDP CPU’s and GPU’s. Cooling these crucial components is an even greater challenge in these tight spaces. What I think we achieved with the C1 is a solution that has outstanding performance for it’s size, and provides a great user experience thanks to its hassle free easy installation and robust accessories. Everything you need is in the box.”

Continue reading →